In this article, we will provide you with a comprehensive guide on how to disassemble and clean the Remington Model 870. You will learn step by step instructions, accompanied by a helpful video, to ensure that you can confidently take apart and clean this firearm. Additionally, we will provide you with some historical context on the Remington Model 870, allowing you to appreciate its significance in the world of firearms. By the end of this article, you will have the knowledge and skills to properly disassemble and clean your Remington Model 870.

A Guide to Disassembling and Cleaning the Remington Model 870

Introduction

In the world of firearms, the Remington Model 870 is a true legend. Known for its reliability, versatility, and durability, the Model 870 has been a favorite among gun enthusiasts for decades. Whether you are a seasoned shooter or a beginner, it is essential to know how to properly disassemble and clean your Remington Model 870 to ensure its optimal performance and longevity. In this guide, we will take you through step-by-step instructions on how to disassemble and clean your Remington Model 870, as well as cover some important safety precautions. So grab your tools and materials, and let’s get started!

Overview of the Remington Model 870

Before we dive into the disassembly and cleaning process, let’s first have a brief overview of the Remington Model 870. The Model 870 is a pump-action shotgun that was first introduced in 1950 by Remington Arms Company. It quickly gained popularity among hunters, law enforcement agencies, and military forces worldwide. The Model 870 is renowned for its robust design, smooth pump action, and wide range of configurations to suit different shooting purposes, such as hunting, self-defense, and sport shooting.

This image is property of www.rem870.com.

Safety Precautions

Before handling any firearm, it is crucial to always prioritize safety. Here are some important safety precautions to keep in mind:

1. Treat every firearm as if it is loaded, even if you believe it is not.
2. Always keep the muzzle pointed in a safe direction, away from yourself and others.
3. Keep your finger off the trigger until you are ready to shoot.
4. Make sure the firearm is unloaded before starting the disassembly process.
5. Store firearms and ammunition in separate locked containers when not in use.
6. Follow all local, state, and federal laws regarding the possession, use, and storage of firearms.

Tools and Materials Needed

To successfully disassemble and clean your Remington Model 870, you will need the following tools and materials:

• Cleaning rod
• Cleaning patches or cloth
• Bore brush
• Gun oil or lubricant
• Screwdriver set
• Cleaning solvent
• Safety glasses

Make sure to gather all the necessary tools and materials before beginning the disassembly process.

This image is property of i.ytimg.com.

Disassembling the Remington Model 870

Now that we have gone through the safety precautions, overview, and gathered the required tools, it’s time to disassemble your Remington Model 870. Follow the step-by-step instructions below:

Step 1: Clearing the Firearm

Before disassembling any firearm, always make sure it is unloaded. Remove the magazine tube cap and slide the magazine follower back to ensure there are no rounds in the magazine tube. Next, visually inspect the chamber to verify it is empty.

Step 2: Removing the Barrel

To remove the barrel, first, engage the action lock lever located on the left side of the receiver. This will keep the action closed and prevent the bolt from sliding forward. Unscrew the magazine tube cap and remove it to release the barrel. Once the cap is removed, slide the barrel forward and lift it off the receiver.

Step 3: Disassembling the Receiver

To disassemble the receiver, start by removing the trigger group. Push out the trigger plate pin located at the front of the trigger guard using a punch or screwdriver. Once the pin is removed, lift the trigger group out of the receiver.

To further disassemble the receiver, remove the bolt carrier by pulling it back and then lifting it out of the receiver. Take note of the position and orientation of the carrier components for easier reassembly.

Cleaning the Remington Model 870

Now that your Remington Model 870 is disassembled, it’s time to clean all the individual components. Start by using a cleaning solvent to remove any carbon buildup, dirt, or residue from the barrel, receiver, and trigger group. Use a cleaning rod with a bore brush attached to scrub the inside of the barrel. Follow up with cleaning patches or cloth until they come out clean.

Next, clean the bolt carrier and other metal components with a cloth or brush soaked in cleaning solvent. Pay close attention to the bolt face, extractor, and other hard-to-reach areas. Remove any excess solvent with a clean cloth.

Once all the metal components are clean, it is essential to lubricate them to prevent corrosion and ensure smooth operation. Apply a small amount of gun oil or lubricant to the appropriate moving parts, such as the slide rails, bolt, and trigger mechanism. Avoid over-lubricating as it can attract dust and debris.

After completing the cleaning and lubrication process, reassemble the Remington Model 870 in the reverse order of disassembly. Make sure all components fit correctly and securely.

This image is property of i.ytimg.com.

Conclusion

Congratulations! You have successfully disassembled, cleaned, and reassembled your Remington Model 870. Regularly maintaining your firearm is crucial for its performance, reliability, and longevity. By following these step-by-step instructions and practicing proper safety precautions, you can ensure that your Remington Model 870 will continue to serve you for years to come. Remember, always prioritize safety and adhere to local and federal laws when handling and storing firearms. Happy shooting!