Disassembly and Cleaning Guide is an article that will provide you with a step-by-step tutorial on taking apart and cleaning your Kel-Tec KSG firearm. You will learn the proper techniques and tools needed to disassemble and reassemble your firearm, ensuring proper maintenance and function. Additionally, this guide will provide you with some historical context about the Kel-Tec KSG. Disassembly and Cleaning Guide
The Kel-Tec KSG is a popular shotgun that is known for its innovative design and reliability. If you own a Kel-Tec KSG, it is important to know how to properly disassemble and clean it to maintain its performance and longevity. In this guide, we will walk you through the step-by-step process of disassembling and cleaning your Kel-Tec KSG, as well as provide some important safety precautions and troubleshooting tips.
This image is property of i.ytimg.com.
Features and Specifications of the Kel-Tec KSG
Before we delve into the disassembly and cleaning process, let’s take a moment to familiarize ourselves with the features and specifications of the Kel-Tec KSG. The KSG is a bullpup-style, pump-action shotgun that has a capacity of 12+1 rounds. It features a dual-magazine system, allowing you to quickly switch between two different types of ammunition. The KSG has a barrel length of 18.5 inches and an overall length of 26.1 inches. It weighs around 6.9 pounds, making it relatively lightweight and easy to handle.
Safety Precautions
Before attempting to disassemble or clean your Kel-Tec KSG, it is crucial to ensure that the firearm is unloaded and that the action is open. Remove any ammunition from the magazines and visually inspect the chamber to verify that it is empty. Always handle your firearm with the utmost care and follow proper safety protocols, such as keeping your finger off the trigger until you are ready to fire. Additionally, always wear eye and ear protection when working with firearms.
Disassembling the Kel-Tec KSG
Removing the Magazine Tubes
To begin the disassembly process, first, make sure your firearm is unloaded and the action is open. Locate the two magazine tubes at the front of the shotgun. Use a small tool or your fingernail to press the tabs located on the sides of each magazine tube. Push the tabs inward while simultaneously pulling the magazine tubes forward. Once the tabs clear their respective notches, the magazine tubes should slide out easily.
Taking out the Trigger Group
After removing the magazine tubes, you can proceed to remove the trigger group. To do this, first, locate the takedown pin located above the trigger guard. Use a small punch or screwdriver to push the takedown pin out from left to right. Once the pin is removed, gently pull the trigger group downward and out of the lower receiver.
Separating the Upper and Lower Receiver
Now that you have removed the magazine tubes and trigger group, you can separate the upper and lower receiver. Hold the shotgun with the barrel pointing upward and the buttstock resting on a stable surface. Pull the upper receiver forward and upward to separate it from the lower receiver. Be careful not to apply excessive force when separating the two receivers, as they are connected by a few small pins and springs.
Cleaning the Kel-Tec KSG
Now that you have successfully disassembled your Kel-Tec KSG, it is time to clean each individual component to ensure optimal performance.
Cleaning the Barrel and Chamber
Start by cleaning the barrel and chamber of your shotgun. Use a cleaning rod with a bore brush attached to remove any dirt, debris, or fouling that may have accumulated. Run the bore brush through the barrel several times, making sure to cover the entire length. Follow up with a clean patch or a bore mop to remove any residual cleaning solution or fouling. Repeat this process until the patch comes out clean.
Wiping Down the Receiver and Other Components
While the barrel and chamber are drying, you can proceed to clean the receiver and other components. Use a clean cloth or a cotton swab soaked in a firearm cleaning solvent to wipe down the receiver, trigger group, and other internal parts. Pay close attention to any areas where fouling or debris may have accumulated. Be sure to remove any excess solvent or cleaning solution before proceeding to the next step.
Lubricating the Moving Parts
Once all the components are clean and dry, it is important to apply a thin layer of lubricant to the moving parts of your Kel-Tec KSG. Use a high-quality firearm lubricant and apply a small amount to the slide rails, action bars, and any other parts that require lubrication. Be careful not to over-lubricate, as excessive lubrication can attract dirt and debris.
This image is property of i.ytimg.com.
Reassembling the Kel-Tec KSG
After cleaning and lubricating your Kel-Tec KSG, it is time to reassemble the firearm and ensure that everything is properly aligned.
Attaching the Upper and Lower Receiver
Start by aligning the upper receiver with the lower receiver. Carefully slide the upper receiver onto the lower receiver, ensuring that the two receivers mate securely. Once aligned, push the upper receiver downward until you hear a click, indicating that the two receivers are locked together.
Inserting the Trigger Group
With the upper and lower receivers secured, it is time to insert the trigger group. Hold the trigger group at a slight angle and insert the front of the trigger group into the recessed area in the lower receiver. Once in position, push the rear of the trigger group upward until it clicks into place.
Installing the Magazine Tubes
The final step in the reassembly process is installing the magazine tubes. Align the magazine tubes with their respective notches on the lower receiver. Push the magazine tubes forward until the tabs click into place. Gently tug on the magazine tubes to ensure that they are securely attached.
Troubleshooting Common Issues
Despite its reliable design, the Kel-Tec KSG may experience certain issues that can be easily resolved with some troubleshooting.
Failure to Cycle
If your KSG fails to cycle properly, it may be due to a dirty or improperly lubricated action. Disassemble the shotgun and clean all the moving parts, paying close attention to the action bars and slide rails. Apply a thin layer of lubrication to these areas and reassemble the firearm. If the issue persists, consult a professional gunsmith for further assistance.
Misfeeds or Jams
Misfeeds or jams can sometimes occur if the shotgun is not properly cleaned or if the ammunition is not of the correct type or quality. Ensure that you are using the correct ammunition for your KSG and that it is in good condition. Clean the magazine tubes and chamber thoroughly, making sure to remove any dirt or debris. If the problem persists, consider consulting a gunsmith.
Light Strikes on the Firing Pin
If you experience light strikes on the firing pin, it may be indicative of a weak or worn-out firing pin spring. Disassemble the shotgun and inspect the firing pin and spring for any signs of damage or wear. If necessary, replace the firing pin spring with a new one. It is always recommended to consult a professional gunsmith if you are unsure about replacing any internal components.
This image is property of i.ytimg.com.
Maintenance and Storage Tips
To keep your Kel-Tec KSG in optimal condition, regular cleaning, inspection, and proper storage are essential.
Regular Cleaning and Inspection
Make it a habit to clean your KSG after each use, even if it has not been fired extensively. Regular cleaning will help prevent dirt, debris, and fouling from accumulating and potentially impacting the firearm’s performance. Additionally, inspect all the components for any signs of wear or damage, such as cracks, rust, or loose parts. Address any issues promptly to ensure the longevity of your firearm.
Proper Lubrication
Apply a thin layer of lubricant to the moving parts of your Kel-Tec KSG to reduce friction and ensure smooth operation. Be mindful not to over-lubricate, as excessive lubrication can attract dirt and debris, causing potential malfunctions. Regularly inspect the lubricated parts and reapply lubricant as needed.
Safe Storage Practices
When storing your Kel-Tec KSG, it is important to follow safe storage practices to prevent accidents and unauthorized access. Store the firearm in a locked cabinet, safe, or dedicated gun vault, ensuring that it is inaccessible to children or unauthorized individuals. Additionally, store your firearm in a cool, dry environment to prevent rust or corrosion.
Accessories and Upgrades
The Kel-Tec KSG offers a variety of accessories and upgrades that can enhance its performance and customization options.
Extended Magazine Tubes
Consider installing extended magazine tubes to increase the capacity of your KSG. These tubes offer additional rounds and can be easily installed by replacing the factory tubes. However, it is essential to ensure that these modifications comply with local laws and regulations.
Optics and Sights
Enhance your accuracy and target acquisition by adding optics or sights to your KSG. Red dot sights, holographic sights, or magnified scopes can greatly improve your shooting experience, especially for those who prefer shooting slugs or prefer precise shot placement.
Enhanced Charging Handles
Upgrade the charging handle of your KSG for faster and easier manipulation. Enhanced charging handles offer better grip and leverage, making it more effortless to chamber rounds or clear malfunctions.
This image is property of i.ytimg.com.
Conclusion
Owning a Kel-Tec KSG comes with the responsibility of regular maintenance and proper cleaning. By following the step-by-step disassembly and cleaning guide provided in this article, you can ensure that your Kel-Tec KSG performs optimally and remains reliable for years to come. Remember to always prioritize safety when handling firearms, and consult a professional gunsmith if you encounter any issues or concerns. With proper care and maintenance, your Kel-Tec KSG will continue to serve you well during your shooting adventures.
