In this article, you will learn about the disassembly and cleaning process for the Taurus G2C. We will provide you with both a video tutorial and step-by-step instructions to ensure you can properly take apart and clean this firearm. Additionally, we will offer some historical context about the Taurus G2C to give you a better understanding of its significance. By the end of this article, you will have the knowledge and tools necessary to maintain your Taurus G2C properly. Disassembly and Cleaning Guide
This image is property of guide-images.cdn.ifixit.com.
Introduction
Welcome to this disassembly and cleaning guide for the Taurus G2C. Whether you’re a first-time owner or a seasoned user of this popular firearm, it’s important to properly clean and maintain your Taurus G2C for optimal performance and longevity. In this guide, we will walk you through the step-by-step process of disassembling, cleaning, and reassembling your Taurus G2C, as well as provide some safety precautions, troubleshooting tips, and storage and maintenance recommendations.
Overview of the Taurus G2C
The Taurus G2C is a compact semi-automatic pistol that has gained popularity for its affordability, reliability, and features. This polymer-framed handgun is chambered in 9mm and has a capacity of 12 rounds, making it a great option for concealed carry or home defense. The G2C features a textured grip, adjustable rear sights, and a manual safety lever, offering users a comfortable and customizable shooting experience.
This image is property of guide-images.cdn.ifixit.com.
Safety Precautions
Before we begin with the disassembly process, it’s crucial to ensure your safety and the safety of others around you. Always follow these safety precautions when handling firearms:
Unloading the firearm
Before disassembling any firearm, always ensure that it is unloaded. Remove the magazine by pressing the magazine release button located on the grip of the Taurus G2C. Pull the slide rearward and visually inspect the chamber to ensure that there is no ammunition present. Always remember to keep your finger off the trigger and pointed in a safe direction.
Ensuring the firearm is not loaded
Even after unloading the firearm, it’s important to treat it as if it were loaded. Always keep the muzzle pointed in a safe direction and exercise caution when handling the firearm. Never point the firearm at anything you don’t intend to shoot, and always keep your finger off the trigger until you are ready to fire.
Required Tools and Materials
To successfully disassemble and clean your Taurus G2C, make sure you have the following tools and materials ready:
- Screwdriver set
- Cleaning solvent
- Cleaning rod and patches
- Gun oil
Having these items on hand will ensure that you can properly clean and maintain your Taurus G2C.
This image is property of i.ytimg.com.
Field Stripping the Taurus G2C
Field stripping is the process of disassembling a firearm for basic cleaning and maintenance without completely disassembling it. Follow these steps to field strip your Taurus G2C:
Removing the magazine
First, ensure that the firearm is unloaded by following the safety precautions mentioned earlier. Press the magazine release button located on the grip of the Taurus G2C to remove the magazine.
Clearing the chamber
Once the magazine is removed, pull the slide rearward and visually inspect the chamber to ensure that there is no ammunition present. Ensure that the firearm is now completely unloaded.
Locking the slide back
To ease the disassembly process, lock the slide back by pulling it rearward and engaging the slide stop. This will expose the interior components for cleaning.
Taking out the slide stop
Push the slide stop located on the left side of the frame from right to left using a screwdriver or a similar tool. This will allow you to remove the slide assembly.
Removing the slide assembly
With the slide stop removed, pull the slide forward and off the frame. This will separate the slide assembly from the frame of the Taurus G2C.
Disassembling the slide assembly
To clean the slide assembly, first, remove the recoil spring and guide rod by pushing it forward and up. Then, remove the barrel by tilting it downward and pulling it out of the slide. Set aside these components for cleaning.
Disassembling the barrel assembly
To clean the barrel assembly, use a cleaning rod and patches soaked in cleaning solvent to remove any debris or fouling. Scrub the barrel thoroughly and ensure that it is clean before proceeding to the next step.
Cleaning the Taurus G2C
Now that you have disassembled the Taurus G2C, it’s time to clean each component individually. This will help remove any dirt, debris, or fouling that may have accumulated during use. Follow these steps to clean your Taurus G2C:
Cleaning the frame and slide
Using a clean cloth or a soft brush, wipe down the frame and slide of the Taurus G2C. Pay close attention to the internal parts and remove any dirt or debris that may be present. You can also use a small amount of cleaning solvent on a cloth to remove stubborn fouling.
Cleaning the barrel and guide rod
Take the barrel and guide rod that you set aside earlier and clean them thoroughly using a cleaning rod and patches soaked in cleaning solvent. Scrub the barrel’s bore and the guide rod to remove any fouling or debris. Make sure to clean both components until they are free of any residue.
Cleaning the magazine
To clean the magazine, disassemble it by removing the floor plate and the spring. Wipe down the magazine body and the spring with a clean cloth or brush. Remove any dirt or debris that may be present. You can also use a small amount of cleaning solvent to remove stubborn fouling. Ensure that all parts are dry before reassembling the magazine.
Applying oil for lubrication
After cleaning all the components, it’s important to apply a thin layer of gun oil to prevent rust and ensure smooth operation. Apply a small amount of gun oil to a clean cloth and lightly coat all metal surfaces, including the slide, barrel, guide rod, and internal parts. Make sure to wipe off any excess oil to avoid gumming up the firearm.
This image is property of i.ytimg.com.
Inspecting and Reassembling the Taurus G2C
Once you have completed the cleaning process, it’s important to inspect all parts for damage or wear. Look for any cracks, chips, or signs of excessive wear on the frame, slide, barrel, and internal components. If you notice any issues, it’s recommended to consult a qualified gunsmith for further inspection and repairs. If everything looks good, follow these steps to reassemble your Taurus G2C:
Inspecting all parts for damage or wear
Before reassembling the firearm, take a close look at all the cleaned components and ensure that there is no damage or excessive wear. This is important for the safe and proper functioning of your Taurus G2C.
Reassembling the barrel assembly
Insert the barrel into the slide, making sure that the barrel lug engages with the corresponding slot in the slide. Then, reinsert the recoil spring and guide rod by pushing it back into its original position.
Reassembling the slide assembly
Align the slide with the frame and slide it back onto the frame. Ensure that the slide fully engages with the frame rails.
Reattaching the slide stop
Insert the slide stop into the frame from left to right and push it in until it clicks into place. Make sure that the slide stop is fully seated and functional.
Testing the firearm
After reassembling your Taurus G2C, perform a function test to ensure that all components are functioning properly. Check the slide, safety lever, magazine release, and trigger for smooth operation. Ensure that the slide cycles correctly when manually pulled and released. Finally, verify that the firearm is properly unloaded before storing or handling it.
Storage and Maintenance
To ensure the long-term reliability and performance of your Taurus G2C, it’s important to store it in a secure manner. Use a locking gun case, safe, or lockable cabinet to prevent unauthorized access. Additionally, establish a regular maintenance and cleaning schedule to keep your firearm in top condition. Regularly inspect and clean your Taurus G2C after each use and follow the cleaning guide outlined in this article.
This image is property of guide-images.cdn.ifixit.com.
Troubleshooting Guide
If you encounter any issues with your Taurus G2C, refer to the manufacturer’s manual or consult a qualified gunsmith for assistance. Some common issues that you may encounter include failure to feed, failure to eject, or misfires. Follow the troubleshooting procedures outlined in the manual or seek professional help if needed.
Conclusion
Properly cleaning and maintaining your Taurus G2C is essential for ensuring its reliability, longevity, and optimal performance. By following the disassembly and cleaning guide provided in this article, you can keep your Taurus G2C in excellent condition. Remember to always prioritize safety when handling firearms and seek professional assistance if you encounter any issues. With proper care and maintenance, your Taurus G2C will continue to serve you well for years to come.
